Julian Wake

Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Julian Wake's Achievements

Newbie

Newbie (1/14)

  • First Post Rare
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. Thanks Steve. Having CXBOWL, CXCARR, CCBOWL and CCCARR in Blanks should cover all the possibilities.
  2. Thank you, Stephen, for making these changes. On CCCARR and CCBOWL, moulded lenticular blanks with positive base curves have the carrier and bowl on the front surface. Since the bowl and carrier can be on the front or back surface depending on the design, can we remove the “back” reference in the Blank descriptions? On the ReferenceID, this category code would be unique at the Product level. There could be multiple blanks in a single Cat Code. Thanks, Julian
  3. Hello Stephen, I noticed a few items I wanted to bring up while this is still in draft. In the LDS to LPDS Conversions, the LDS Field “Seg Thk” is shown to correspond to Layouts/Layout/SDEPTH in the LPDS. The LDS Seg Thk is the fused segment thickness in glass multifocals, but I believe the LPDS SDEPTH is intended to be the vertical height of the segment. Glass bifocals and trifocals are still being produced, so I think we need a separate fused seg thick element, probably in Blanks/Blank. I didn’t see Seg Sep and Up Add equivalents in the LPDS, but these items will continue to be needed. The LDS fields Slab, Car Rad and Bwl Diam convert to SLBP, CCCARR and CCBOWL in Blanks/Blank according to the LDS to LPDS Conversion table. I’m not seeing these elements in the Blank section on page 16. Int Ht should correspond to Layouts/Layout/IntermediateHeight, but I’m not finding this in the Layout section on page 15. The LDS Field “Material” converts to Materials/Material/Code, but I don’t see Code in the Material section on page 14. We might consider not deprecating Cat Code. Some manufacturers use this field today for their item or product category code. It’s sometimes useful to cross-reference the mfr’s cat code with OPC when supplied. Is it possible to continue to have an optional Cat Code along with the auto-generated blank collection ID? Can Layouts/Layout/MFH be changed from Integer to Numeric? Some progressive designs have minimum fitting heights such as 13.5 and 16.5. If I can provide more information for any of these points, please let me know. Thanks, Julian